Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="rnease" data-source="post: 369496" data-attributes="member: 15241">I have read most of the posts on conversions and modifications, all the way from page one to page 113. On the subject of coatings with epoxy, it seems that the primary products used are Gluvit and Steelflex. Parker's Duck Paint seems to be heavily used, as well.I have been working with System Three Epoxies, and have not seen any mention of those products. I am not sure if it's because they have not been mentioned on this site, or if it's because they are not as widely known, or because no one has thought to try them.I plan on using them on my mod, both to bottom coat, and to coat the inside of the boat (after I rebuck rivets, patch holes,  and prior to installing the deck. I'll report on the success (or lack thereof) of these products on my build post. In the meanwhile, I would like to hear from anyone who may have used System Three Epoxies. If you have used them and had either success or failure, I would like to know. Thanks for looking.</blockquote>