Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="grummy" data-source="post: 517006" data-attributes="member: 34668">Hello ! I've got a 4806E 4HP Evinrude with the Weedless Lower on a little 12' V-Bottom. I've only had it out once with this motor, and while it runs fantastic, it seems that it is not much more ooomph than the Evinrude 2HP that I had on it.The weedless uses OMC # 0319004 2 Blade prop, and the prop really looks wacky. The blades only have a little lead in twist and then go really flat. The 2HP had a 3 blade on it that looked quite normal. I am curious if and how I can try a 3 blade prop on this 4HP, or at least a prop that doesn't look so abnormal. I already know that the non-weedless lower 3 blade prop is not going to be a direct fit because the diameter is slightly larger, but in pictures, it also looks like the spline side is much deeper. That rubber spline filler/adapter is the same part number, so if no one has an idea on what other prop might fit, I will probably order one and see if I can cut things to fit.I'm not necessarily worried about weeds right now. Thanks for any help you can give !</blockquote>