Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="airshot" data-source="post: 517592" data-attributes="member: 1183"><p>If you don't have ptt, then some type of support is needed that is fixed and place and can't slip or fall out. On my small manual tilt motors I usually built a wood wedge to keep them tilted up with some type of strap or even a bungee cord to keep the device in position.  Follow a boat over a rough set of RR tracks and watch the motor flop up and down....that is what you need to stop from happening !!</p></blockquote><p></p>