Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="kofkorn" data-source="post: 378366" data-attributes="member: 7076">I think that keeping pressure on the carpet while the glue is curing is more important than scuffing the aluminum.  Use some sand bags or feed bags and place them on top while curing.  The tricky part is the vertical panel next to your console.  When I pulled the original carpet off my Pro 17, I found that the vertical carpet behind the seats weren't well adhered as compared to the top surfaces.  Either way, make sure you give it a couple of days before doing a lot of walking on it.Good luck!</blockquote>