Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="kofkorn" data-source="post: 445151" data-attributes="member: 7076">I agree with what you're seeing.  The 2 part foam supports the entire rear deck.  When I did my rebuild, I found that the only water logged foam was in the bottom inch or two.  So I left 90% of the foam in the panels in place and cut out the bottom 2 inches.  then I slid 2" foam panels underneath to replace what i took out.  it worked well, and I've been fishing on it for 4 years with no issues.  I would leave in whatever you can, otherwise you'll need to rebuild the structure as previously mentioned.Good luck!</blockquote>