So I was going through some routine maintenance in my service manual and decided to grease all the zerks I could find from the photos it provided. Most were pretty minor except the one in the middle that I really needed to pump for a while before I got some grease to come out. Is this the most common one I should be checking to make sure it's fresh? Not sure how often the previous owner did it. Pic for reference on which one I'm referring to. I want to say the manual lists it as the "Swivel bracket".
There was another one that I found that was kind of behind and underneath the carbs. I couldn't figure out if this one is pointed out in the manual as some of the pictures are fairly small. Looks like a grease zerk to me though. Kind of hidden under the motor a bit. Assuming I should grease that bad boy with some OMC Triple-Guard grease? It's a 1990 70hp Johnson fyi.
There was another one that I found that was kind of behind and underneath the carbs. I couldn't figure out if this one is pointed out in the manual as some of the pictures are fairly small. Looks like a grease zerk to me though. Kind of hidden under the motor a bit. Assuming I should grease that bad boy with some OMC Triple-Guard grease? It's a 1990 70hp Johnson fyi.
