Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="MDCrappie" data-source="post: 513860" data-attributes="member: 160"><p>I don't remember exactly where it sits now and the motor is in the shed. What I did though was raised the motor 1/2" at a time. Got to the point where I needed raise it above where the clamp would not hit transom so I made that plate. I then raised the plate 1/4" at a time (securing it with 4 screws into transom) and did test runs. When the motor started to "blow out" I stopped and took the bracket back down to the last spot I had it. Then I bolted the bracket thru the transom. IIRC my top speed went from 10 or 11 up to 14+mph.</p></blockquote><p></p>