Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Pappy" data-source="post: 501057" data-attributes="member: 3278">No....not supposed to move very much. It is just an idle rpm adjustment. Almost sounds like it is doing what it s supposed to do. but......On the '89 model year engines you have a throttle cable. You can separate the joint where the cable moves the throttle advance assembly. Do this and see if the throttle handle moves easily and then see if you can manually move the arm the cable attached to easily. This will tell you what has to be looked at. Put the engine in gear (engine not running) and try it as well....you should only have full movement in gear, limited movement in neutral. </blockquote>