TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
Looking for fuel/oil mix ratio options
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="thill" data-source="post: 510076" data-attributes="member: 4972"><p>Most 90's Johnsons require 50:1 TCW3 oil if premixing. If you are idling around, it will probably be okay, but I wouldn't run it hard with 100:1, synthetic or not. A lot of bass guys, who run long distances at WOT run the big 2-strokes at 40:1 or even 32:1.</p><p></p><p>Doug, </p><p>Your description sounds like it's running a little rich at idle, and just needs a minor idle adjustment as Mr. Giggles wrote. Adjust it a little at a time, probably 1/8 turn is all it will need.</p><p></p><p>Even so, better a little smoke than burnt cylinders or damaged bearings! You may have heard the saying to never let perfection ruin a good job? Lean it out too much and you could torch your engine. Just be careful.</p></blockquote><p></p>
[QUOTE="thill, post: 510076, member: 4972"] Most 90's Johnsons require 50:1 TCW3 oil if premixing. If you are idling around, it will probably be okay, but I wouldn't run it hard with 100:1, synthetic or not. A lot of bass guys, who run long distances at WOT run the big 2-strokes at 40:1 or even 32:1. Doug, Your description sounds like it's running a little rich at idle, and just needs a minor idle adjustment as Mr. Giggles wrote. Adjust it a little at a time, probably 1/8 turn is all it will need. Even so, better a little smoke than burnt cylinders or damaged bearings! You may have heard the saying to never let perfection ruin a good job? Lean it out too much and you could torch your engine. Just be careful. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Boats
Motors
Looking for fuel/oil mix ratio options
Top