Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Johnnyboy11" data-source="post: 518515" data-attributes="member: 35954">I ground the heads as low as I could after I drilled the middles out and then used a chisel to shear the rest of the head off. Took a lot of leverage and some brute force to pop the floor up finally.I pried up with my lashing bar for chain lashing so hard that it was lifting the stern of the boat off the bunks on my trailer, it finally gave after a while. Also once you get the floor off you may have to tap the rest of the old rivets through the beams with a 1/4 inch punch.</blockquote>