Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="DarrellS" data-source="post: 508534" data-attributes="member: 24234">I had some troubles when I mounted my Terrova , The deck that I wanted to mount to cracked from the stress and flex , I guess it was to thin and had to have it replaced with a thicker piece .When I got the boat back from the fab shop I used a piece of HDPE to spread out the load and shift the mount enough to place the motor where I wanted it .Once I had the shape I wanted I used a router to put radiuses on the edges and then sanded it with a DA and 300 grit .To make it look nice again I used a propane torch .[URL unfurl="true"]https://www.amazon.com/gp/product/B01M9GL3XH/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1[/URL]</blockquote>