Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="gah319" data-source="post: 349470" data-attributes="member: 13154"><p>Started the dry fitting of the vertical sections.  Leaving about 1/4 inch of room for the carpet.   My son was home for the holiday weekend so I got him to hold the bucking bar as I riveted the transom supports.  Turned out quite well.  Put in the 3/16" rivets that are just filling in the holes from taking out the bench seats.  Need to order another set of rivets.  There are more holes left since I took out everything that was riveted or screwed in other than the struts.  Once I get all the pieces cut then I can start the spar varnish.</p></blockquote><p></p>