Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="LaqueRatt" data-source="post: 507037" data-attributes="member: 32586"><p>What you need is a D/A sander. Feather in the edges and make sure the rest is slightly rough. Matters not one little bit if there is some paint left. If you D/A it well you won't be able to tell. Should only take you a few hours. For what it's worth I've had two Harbor Freight sand blasters and neither one is fast. At least not with a 5 HP compressor. So if you're going to blast you better figure on a thousand bucks for a quality compressor if you don't already have one.</p></blockquote><p></p>