Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="oilsmoke" data-source="post: 516883" data-attributes="member: 35880">I patched up a corroded mess of a jon boat some years ago, the thing had sat on a couple bails of hay for years full of bird droppings. I lightly spot blasted the corroded areas and then filled them with JB Weld. It had close to a 100 pits and holes that had to be filled. I finished it up with a coat of Gluvit on the inside a couple coats of paint.I used Jb Weld because its what I had but I'd venture to guess that PC7 or Marine Tex would work just as well. I had that boat for 15 or so years before selling it to a buddy who still uses it.</blockquote>