TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Jon and V Boat Conversions & Modifications
Pletzy's 1991 Sylvan Sea Snapper V-Bottom Mod
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="pletzy" data-source="post: 352221" data-attributes="member: 13263"><p>I appreciate the compliments @pitts101, @Silverad04 & @KTS! </p><p>Few more things done... here is how I attached my removable seats to the deck using toggle bolts. I put a washer on the top of the bolt because the holes were a little big on the plastic mount.[ATTACH=full]63616[/ATTACH] My hinges arrived too... I think a 2" gap between screws was overkill, so I used 3" gaps on all the other hinges. I made sure to offset the screw pattern so the screw heads don't touch.[ATTACH=full]63617[/ATTACH] Built a cubby at the bow. Its just a 1/2" ply piece (horizontal) butted up against another 1/2" piece (vertical). The vertical has a small 1x2 brace at the bottom to screw into.[ATTACH=full]63618[/ATTACH]</p></blockquote><p></p>
[QUOTE="pletzy, post: 352221, member: 13263"] I appreciate the compliments @pitts101, @Silverad04 & @KTS! Few more things done... here is how I attached my removable seats to the deck using toggle bolts. I put a washer on the top of the bolt because the holes were a little big on the plastic mount.[ATTACH type="full" alt="toggle.jpg"]63616._xfImport[/ATTACH] My hinges arrived too... I think a 2" gap between screws was overkill, so I used 3" gaps on all the other hinges. I made sure to offset the screw pattern so the screw heads don't touch.[ATTACH type="full" alt="hatch1.jpg"]63617._xfImport[/ATTACH] Built a cubby at the bow. Its just a 1/2" ply piece (horizontal) butted up against another 1/2" piece (vertical). The vertical has a small 1x2 brace at the bottom to screw into.[ATTACH type="full" alt="bow.jpg"]63618._xfImport[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Boats
Jon and V Boat Conversions & Modifications
Pletzy's 1991 Sylvan Sea Snapper V-Bottom Mod
Top
