Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Sinkingfast" data-source="post: 515929" data-attributes="member: 15306">Bought new yami clone 30hp.  Runs great from 2500rpm and up.  Below it runs rather strange.  After checking other parameters I noticed the reeds are preloaded to the plate about .010in.  The reed is at 0 where they are attached and tapers to .010 high off the plate at the ends.  Rubber coated and not the flower pedal style.  After short investigation I see those reed plates are designed  like that.  Probably explains others with poor low speed operation.  The person who decided to do that probably thought it would be a good idea. Bought new reed assy and am gonna flatin that plate and install.   I betcha thats the issue..</blockquote>