Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="LDUBS" data-source="post: 499527" data-attributes="member: 21536">Here is a pic of a simple cradle I made for the rear of my boat.  Lower the tongue jack all the way down so the transom is in the air as far as it will go.  Slide the cradle under the transom.  Raise the tongue jack.  The stern will lift off the rear of the trailer and be sitting on the cradle. .  Raise the tongue as high as it will go.  Put a support under the bow.  Lower the tongue.  Boat is now clear of trailer. IMO, the 4x beams shown in that video are way overkill for what you need.   [ATTACH=full]115192[/ATTACH]</blockquote>