Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="crannman" data-source="post: 479054" data-attributes="member: 28673"><p>Hello LDUBS, it’s a PELICAN 1020 Micro Case Series box. I did need to drill a small hole for the reset button to work, as well as for the circuit breaker battery and trolling motor wires. Fed cut end of wire through holes drilled in the corners. I used an exacto knife and cut the liner of the box around the circuit breaker and volt meter to have a smooth surface then mounted everything using sticky back Velcro. Drilled the hole with a drill bit made for plexiglass then shaped with Dremel router bit.</p></blockquote><p></p>