Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="airshot" data-source="post: 492449" data-attributes="member: 1183"><p>When I had my 14' V hull tinnie, I had the same issue.  I bought some aluminum angle, that attached to the bench seats as low as possible to the floor to give me the width of the floor I wanted. The plywood floor (5/8" plywood) was suspended on the angle between the bench seats. Worked excellent as no floor vibration when in rough water. In the front had plenty of room ( depth) to add a hatch to store my anchor and line in a small bucket.  A couole SS screws kept the floor in place and some short nap outdoor carpet kept things quiet</p></blockquote><p></p>