TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
Slight popping sound when going up on plane
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="~kev~" data-source="post: 495653" data-attributes="member: 32401"><p>30 hp Evinrude, around 1996 model.</p><p>15 foot alumaweld boat</p><p></p><p>Last summer I noticed a slight popping sound, which was barely noticeable when the boat goes up on plane. If I go slow and ease the boat up on plane there is no popping sound. The pop does not sound like metal on metal, it sound more like plastic. At first I thought it was my fuel tanks pulling a vacuum, then popping when the air pressure stabilized. But I am doubting that theory.</p><p></p><p>I recently did a carb tear down and clean as there was lots of trash in the carb. Fuel lines from the carb all the way to the fuel tank were replaced.</p><p></p><p>There is very little slack in the prop back and forth movement, no more than usual. I would say the prop moves back and forth maybe an 1/8 inch.</p><p></p><p>Oil in the lower unit is changed twice a year or so. Boat is used in fresh water, mainly on rivers.</p><p></p><p>Any suggestions?</p><p></p><p>Pic attached of motor on local river.</p></blockquote><p></p>
[QUOTE="~kev~, post: 495653, member: 32401"] 30 hp Evinrude, around 1996 model. 15 foot alumaweld boat Last summer I noticed a slight popping sound, which was barely noticeable when the boat goes up on plane. If I go slow and ease the boat up on plane there is no popping sound. The pop does not sound like metal on metal, it sound more like plastic. At first I thought it was my fuel tanks pulling a vacuum, then popping when the air pressure stabilized. But I am doubting that theory. I recently did a carb tear down and clean as there was lots of trash in the carb. Fuel lines from the carb all the way to the fuel tank were replaced. There is very little slack in the prop back and forth movement, no more than usual. I would say the prop moves back and forth maybe an 1/8 inch. Oil in the lower unit is changed twice a year or so. Boat is used in fresh water, mainly on rivers. Any suggestions? Pic attached of motor on local river. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Boats
Motors
Slight popping sound when going up on plane
Top