Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="gunz" data-source="post: 415948" data-attributes="member: 20796">I had this problem on my dad boat with the 25. His transom has quite a bit more "tuck" toward the bottom as mine did. All the way down was not far enough due to the negative angle.  I made some wooden shims and fixed it. I didn't want to install trim tabs due to parasitic drag and knowing ti handled better with the old 18 as far as porposing.  Ended up being for not as I removed the 25 and went to a 9.9 4 stroke Honda. he loves it but still trimmed way down due to the transom angle.</blockquote>