Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Burner208" data-source="post: 521621" data-attributes="member: 36886"><p>Do you have a bumper jack or 3? Put them on the floor on top of a 2x4 and use the Jack's to pull the sides up while pushing down at the corner seam. Use a blow torch to aneal the aluminum beforehand and she probably won't crack to much.  I think I could fix that, won't ever be 100% but it can live again. Just have to keep pulling and beating, trust the process and it will come back. Going to have some seam work in the end as well.</p></blockquote><p></p>