Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="wmk0002" data-source="post: 484651" data-attributes="member: 13975">Just got back from the lumberyard. Bought a 3/4" sheet of BC plywood for $47 along with some 5/16"x24 ipt bolts to pull the flywheel on an old 9.8 Mercury.Gonna get some epoxy from raka ordered up this evening. While at it I'm going to get some extra to replace some of these old patch jobs done on this boats hull. Was going to get the thin epoxy for the the transom sealing but do I need a thicker viscosity epoxy for aluminum patch work? I've been somewhat lucky and not had to deal with leaks in aluminum hulls until now.</blockquote>