Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="gillhunter" data-source="post: 330357" data-attributes="member: 5151">"the funny thing was just how out of wack these boats are made. some of these stringers arent even close to square- one point on the port side of the hull may be 3/4" out of the same point on the starboard side. that works in the full cartesian grid, meaning that any designs i had on cutting out square pieces and using geometry can be eliminated."I experienced the same issue with my hull. Assembly tolerances must be +/- 1/2" :LOL2:. I ended up making cardboard templates. :mrgreen: Good luck with your build. I'm sure it will turn out great.</blockquote>