Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="typed by ben" data-source="post: 331943" data-attributes="member: 11717">yep gotta keep telling myself that.  actually i dont want to finish it this winter and then have to wait until april or may to use it for the first time! im calling the deck done.  wrote part IDs at all the joints and wrote them down.  that should help with reassembly as i break it all into subassemblies. [ATTACH=full]57716[/ATTACH]im gonna do some tests monday to see what the limits are of this .080 aluminum.  id really rather just form the doors and seam the corners but i believe i will have to add some angle or bar in to make them stiff enough.  no big deal if i have to, just another step.after that i gotta start on supports that go from the deck to the stringers.  i should be able to get away with 2 sections of support- imagine 2 lateral lines from port to starboard that break the deck into thirds.  last is cutting the sheet for the deck.  not looking forward to that.</blockquote>