TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Jon and V Boat Conversions & Modifications
YJs 1236 Semi V Mod
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Y_J" data-source="post: 375555" data-attributes="member: 14258"><p>Guess I should add an update to the current status (photo's included) :shock: Didn't realize it had been so long..</p><p>Ok. I've picked up the Pink Foam for under floor flotation, and also 1/2" Exterior Ply Wood for the floor and decking. Also picked up a can of Water Resistant Spray Adhesive to glue the foam down to the curvature of the bottom of the boat. My templates are made as mentioned earlier. Got the foam measured and cut, Finished priming the inside of the boat, and now have the boat off the trailer, upside down and working on the bottom and priming as I work my way back. Got a small crack fixed with JB-Weld and a couple of dents filled in with Steel Epoxy Putty. All on the Keel. Tomorrow will finish up on the Keel dents and a couple inches of worn away area, (leaving a hole) at the very back of the Keel, then spray the rubberized sealant on the rivets all the way down, let that cure a while and primer the rest of the bottom.</p><p>Woooooot, Making some progress.</p><p></p><p>Here are some pics to bring you up to date so far:</p></blockquote><p></p>
[QUOTE="Y_J, post: 375555, member: 14258"] Guess I should add an update to the current status (photo's included) :shock: Didn't realize it had been so long.. Ok. I've picked up the Pink Foam for under floor flotation, and also 1/2" Exterior Ply Wood for the floor and decking. Also picked up a can of Water Resistant Spray Adhesive to glue the foam down to the curvature of the bottom of the boat. My templates are made as mentioned earlier. Got the foam measured and cut, Finished priming the inside of the boat, and now have the boat off the trailer, upside down and working on the bottom and priming as I work my way back. Got a small crack fixed with JB-Weld and a couple of dents filled in with Steel Epoxy Putty. All on the Keel. Tomorrow will finish up on the Keel dents and a couple inches of worn away area, (leaving a hole) at the very back of the Keel, then spray the rubberized sealant on the rivets all the way down, let that cure a while and primer the rest of the bottom. Woooooot, Making some progress. Here are some pics to bring you up to date so far: [/QUOTE]
Verification
Post reply
Forums
Boats
Jon and V Boat Conversions & Modifications
YJs 1236 Semi V Mod
Top