You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
-
-
7
So true! I still need to pull two strips of tape off. I'll have to paint the top and interior once all the plywood is down.
Floors will...
-
7
I was rolling. I just put my 3rd color coat on last night. I thought about a 4th coat but the evening temps keep climbing and I don't...
-
7
1st color coat is on!! Paint is tacking up a little too fast still.
16oz - Rustoleum Professional Safety Blue
2oz - Acetone
1 cap full...
-
7
Thank you. I hope some information helps someone else one day. I decided to post progress to keep me accountable and moving forward on...
-
7
Boat was wiped with undiluted vinegar and two wipes of acetone this morning. Rustoleum self etching primer was applied before rolling on...
-
7
Spent some time sanding last night and hopefully applying etching primer and clean metal primer on Saturday morning.
Questions:
- 120...
-
7
That is a great idea. I'll have to take a look the next time I am in the store. Thank you for the idea and the link.
-
7
I'm starting to think about going with EVA flooring. My biggest issue is water getting into the front of the hull and sitting there...
-
7
I ended up notching the floor since the tunnels didn't seem to attach to the floor. Maybe they rested on it when it was built. I'll have...
-
7
Washed and baked in the sun to dry everything out. Next up is Gflex and Gluvit.
-
7
I spent more time trying to get the bow template made than the other two combined. There had to be an easier way but I have it finished...
-
7
Two floor boards are cut. I have some minor trimming and sanding to do. It's not perfect but I'm happy with it. I'll have the gap sealed...
-
7
I did look at epoxy and went back and forth on it for weeks. What ultimately swayed my decision was already having a gallon of mineral...
-
7
I still have to research more on my above questions.
I am working on cleaning up around seams and rivets inside the hull. I am hoping...
-
7
Wood sealing questions:
- Should I apply the OTF before I fill the plywood voids with waterproof wood glue? If the wood doesn't swell...
-
Loading…
-
Loading…