Added rubrail to a tinny

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DaleH

Well-known member
TinBoats Supporter
Joined
Dec 12, 2014
Messages
3,635
Reaction score
474
Location
Eastern Mass
Found this 'D'-shaped rubrail at a boat store, scrap roll of about 50', bought for $30. The top edge of the D sticks out a bit so it sits on the horizontal portion of the rail. To make it work I had to modify rivets and the rivet setting head, as there was only about 5/16" gap inside the rubrail, where some kind of plastic insert normally goes.

See pictures below. Other photos as installed are here: https://www.forum.tinboats.net/viewtopic.php?f=3&t=43158
 

Attachments

  • Rubrail04.jpg
    Rubrail04.jpg
    96.9 KB
  • Rubrail03.jpg
    Rubrail03.jpg
    78.2 KB
  • Rubrail02.jpg
    Rubrail02.jpg
    23 KB
  • Rubrail01.jpg
    Rubrail01.jpg
    36.7 KB
"Plastic insert" or rope. See if the right size piece of rope won't wedge in that track to cover the rivets.
 
Stumpalump said:
"Plastic insert" or rope. See if the right size piece of rope won't wedge in that track to cover the rivets.
It's my 12-year's boat ... she has already informed me that she wants to put a nice white rope in there ... but I like the idea of a white plastic, as the rope would get dirty.
 
Found this 'D'-shaped rubrail at a boat store, scrap roll of about 50', bought for $30. The top edge of the D sticks out a bit so it sits on the horizontal portion of the rail. To make it work I had to modify rivets and the rivet setting head, as there was only about 5/16" gap inside the rubrail, where some kind of plastic insert normally goes.

See pictures below. Other photos as installed are here: https://www.forum.tinboats.net/viewtopic.php?f=3&t=43158
Dale, how far apart are the rivets?
 
I would've killed for some of that stuff when I was rehabbing a jet ski last year that didn't have any of the factory rub rail tracks. That crap is expensive!
 
Sometimes that lip that you have on the top goes on the bottom The intended purpose is to seal and keep water from getting up behind the rub rail, but it really depends on your application and boat.

What you did looks great! Awesome find!
 

Latest posts

Top