Search results

I could, but it's a new boat and would definitely void my warranty!

Yes, according to their website, you boat is on the will not fit list (due to rivets)

I have average experience with grease guns. I don’t live on a farm so no tractors. I grease for maintenance purposes, which is not much more than 1-2X per year for the below vehicles/toys. I have and use the inexpensive off the shelf grease guns and they have troubles with leaking, air...

My reference to concrete ramps and docks nearby was to infer that I do not put boat on ramps...I use the trailer for all launching / retrieving. The keel guard is for added protection to a commonly scratched/gouged area of a boat.

I am considering installing one of these on my new Tracker Pro Guide V16SC. My local ramps are all concrete with docks close to ramp, and even the locations/ramps I plan on visiting (CO river) are also concrete with docks close to ramps. However, I think the added protection in a hull location...

Thanks for all the replies and great discussion. I think we all now understand what the heading sensor is for! NOTE: I've asked others, that have the same boat as me, and many have installed it up on bow platform adjacent to TM base with no issues, even though it is not 2' away as indicated...

I believe it determines the boats forward position and shares that with GPS and then 5' jogs are based on that forward position...right, left, etc. Not sure if spot-lock / jog functions without it, and if it does, perhaps reduces accuracy.

I'm having second thoughts about mounting it adjacent to TM base. However, even if I went and tested it in different locations, I'm not sure I could even determine if one place is more accurate than another?

This is how I ended up with my cable attachments.....

I agree with LDUBS...on smaller lakes heavy duty anchoring gear is not necessarily needed. I use a Lewmar 2.2# claw anchor for the bow. For stern, even a small mushroom or fluke anchor would be fine. 6' of 1/4" chain and 100' of rode on bow. I. may end up using vinyl coated chain, so not to...

Thanks and glad to hear your TM works with no issues even though it is less than 2' away from TM base! From what I have been reading, several owners have their sensor mounted adjacent to TM base (less than 2' away) with no issues. Since I temporarily placed my sensor adjacent to TM base and...

Looks great! Does it have a second seat post up at bow?

The following is related to my new Minn Kota Terrova. I am at the point of installing the Minn Kota heading sensor. The manual states to install at least 2' away from ferrous metals and also the head unit of TM base.... in clear view path of TM. The heading sensor is basically a bluetooth...

Great find! That looks like an original SC....VERY cool! That's going to be a FUN project. It appears so original....try and keep as original as possible. Share your pics along the way and reach out here if you need any help in spending your money....we have experts on that subject readily...

New motor all the way! Targa 17 is a nice boat. The 60 Tohatsu is a nice motor. Consider this before you purchase.... The Targa 17s were sold as Tiller, SC, and WT. I've not seen any Targa 17s with tiller out here in the west, but have seen the other two. You could easily convert yours to...

I believe Yamaha uses all three types depending on the motor. There may also be internal anodes; it would reason that you would want all anodes made of the same material. I'm sure you are using the correct anode seeing as it is an OEM anode. If it were aftermarket, all bet are off! You...

This article discusses wing nuts and when they are not allowed....(wires over 6AWG). ABYC E10 is where this information comes from. ABYC charges for its materials, which I think is ridiculous, especially considering the risk involved with boats and boat owners. Battery Terminals

I ended up using these....with some rubber/plastic covers (pics below). Marine Battery Terminals Connected NEG starter cable to new marine clamps threaded 5/16" post and 2 AWG from new marine clamps 3/8" POS to ON-OFF switch. Battery Charger cables and NEG house wires are connected to the...

Am I missing something....I don't see and ring terminals connected to the Military style clamps? I see the Blue Seas connectors that are connected to the threaded post, but nothing connected toMilitary clamps.

The concern is that the threaded post is the "weak link" if you will. many times it is over tightened and can break off or cause internal damage (not always visible). Also, the heavier/thicker post is more stout and is preferred for the cranking amps needed for outboards. Threaded post can be...