Search results

If color was the only issue, I'd do a vinyl wrap on it.

Having 3 knee braces might give a range of years it could be. Have you identified the model?

After looking at the site it might be in "Fine" condition. So maybe $8.00.

I'd be happy if it's worth $5.00.

The jack plate does 2 things first it raises the motor second it moves the motor to the rear 4 inches. Thats setback. You can drill out a few more of the dimples on the jacker and raise the motor an inch or more. My motor is about 2 inches above the bottom of my hull.

With the setback of the mini jacker you can raise the motor an extra inch or more.

Is that a putting green on your boat?

I don't plan on selling just something to do before the GF and I get dinner at a restaurant we like across the street.

Six or seven years ago I got an 1881 Indian head penny in change at Menards. Next week a local jewelry store is having an appraisal fair and will be buying gold, silver, gemstones, watches and coins. My Penny is 143 years old and is in good condition. I know without seeing it it's hard to...

Is there a local scuba dive team or club that could help retrieve the boat?

Install an all-aluminum transom. It can carry the weight of the motor and forces applied on the transom. Then you can epoxy a new aluminum skin to the transom.

I would take it apart and see what it needs. Clean the bearings and races do an inspection. Might only need the bearings repacked. You will still need a new seal, check the old seal for a number or measure the spindle. If you need everything new you will know exactly what parts you need. Also...

If you need a cotter pin right now it will be fine, then order some online.

I run a short shaft 25 hp Mariner that weighs 105LB on a 1971 1436 Sea King. I moved the fuel tank and battery forward to help balance out the boat. I still have to watch when coming off plane, I have to give it a little throttle so a following wave doesn't come over the transom.

I'd be looking at replacing the trailer.

They were the Secord largest cyber security company.

Any reason why there's no dot between the two original rivets in the upper row?

How important is it that my rod and reel look good together? Will I catch more fish?

That looks like some new kind of hell.

It's hard to tell how bad it is. I'd take a stainless-steel wire wheel on a drill or angle grinder and strip it down.