Search results

72 degrees

I will find out whats the exact angle of that transom,gonna dig up an angle inspection tool I have some where in the house,,,what I meant was for example take a piece of plywood 18by 18,,mark 5 inches off on one corner,then draw aline straight up thats all I had on the plans,,but I will measure...

When I built it, the sides were 18 inches from the top part of the 18 in to the bottom 5 inches were cut to meet the top, that would be the angle ,when built I chopped off an extra 2 inches on the transom for a short leg engine(16 inches left back there),will have to wait till the snow...

Heres more info,the boat is a hand made by me,14 ft 6: weight when new was 350 lbs,it a john boat 4 ft on bottom 5 ft at the top,al built with 1/2 mdo plywood this why its so heavy lolll but man o man is it ever stable on the water,original prop on that motor was 9 1/2 by 10 new prop is 9 1/4 by...

Ordered a new prop for my old motor,original was a 9 1/2 by 10 new one that came in is a 9 1/4 by 10 blades are quite wider also,guy at the shop says he ordered original size but thats what came in,,will this propeller work just as fine without messing up my motor or should I refuse and wait for...

Hi,just bought new to me,15 hp johson plain jane motor owner says its a 1980.. just to be shure what does J15RCSD tell you?Think its gonna need a new prop and water impeller so would like to be shure of the year thanks Mikey

Would like to know when was the last year them boats were built?

Me again.Not much of a mecanic,wondering if that motor has points,or if its a kinda electronic firing thingy??Motor doesnt run like I'd like it to do so,then before I start tearing into it,(by the way the bolts n nuts are kinda rusty)and finding out there aint any points to replace,was told that...

Bought a 20HP johnson short leg motor today,cant quite figure the year it is,On the little plate theres them numbers,,J20CRCNB and also C8144052,,man behind the counter says its an 1981,previous owner doesnt have a clue,,looked up the "introduces "system,but there aint no B in there.Motor runs...

Unless the exchange rate for US vers CAN money is exceedingly high,it wont be worth it.Outboard motors out here sell for close to twice the price compared to south of the border,,,just my two cents

I often use WD 40,works great for me and is harmless on paint and engine parts

Just got hold of an older outboard motor,its a Gamefisher 1.2 got for free since it belonged to my brother in law and he passed away recently will miss the guy,,,,nyhow my sister gave me his little outboard thing looks mint,,serial is A011168 and model is 298-585120 can anyone tell me what year...

Just got hold of an older outboard motor,its a Gamefisher 1.2 got for free since it belonged to my brother in law and he passed away recently will miss the guy,,,,nyhow my sister gave me his little outboard thing looks mint,,serial is A011168 and model is 298-585120 can anyone tell me what year...

Local mecanic friend of mine opened up the carburator,the float was full of gas,,,,gotta go to the dealer tomorrow to get my hands on one....hoping to have that motor running soon to go fishing..

Can see the gas pouring inside the carb till it leak right out of it..

Cap completely unscrewed,this problem completely baffles me will have to check with some of the repair shops in my area,,,

Got this motor a few days ago,got some kind of fuel problem, runs fine without the gas hose conected to the gas tank,runs without the hose for a while till it runs out of gas,runs with the hose conected to the engine,but the moment I plug it into the gas tank it floods itself out,,,,,,??? any...

Thanks guys,was just curious about the real year of the motor,in case of needed repairs,will have the little thing checked out in the near future,motor looks mint hoping it a good one ,but got it for a low price so no big worries there,thanks for your help much appreciated Mike

Last letter could be an M ei E2RCSM not shure eyes are getting older vision not exactly what it used to be,,,,,,,

I,ve just bought a 2hp evinrude,numbers on it are E 2RCSH and C 7097214,,,can someone tell me the year please,,,was told it was a 1999 but find it hard to beleive..