Search results

hey i edended up going with intrlux 2000e pait its a little more but should holde up better i got a gallon of paint and shoud do the hole thing easy. it was only a 100 bucks +/- it seam to bee the best solution. i thing will let you know how it goes.

No I just pull it in the boat

Hay u might run into problems with that dimond plate on the back of the transom like that. U want it to bight into that peace of wood on the back of the transom on the out side. As for the peace on the inside of the boat that one should be good and help keep bolts from maring up the transom. As...

hay i dont think that is a four stroke but a oil injected 2 stroke judging but the pic of the engine were the cover is off. so that alarm could be low fuel oil or hi temp alarm. if it is a high temp alarm you should replace the impeller for the cooling system it should only take a little bit to...

i got mine at walmart for like 10 bucks it works really well makes pulling up the anchor a breeze.

Im going to go with the steal flex stuff is there more than one kind if so which one should I get

thanks lckstckn2smknbrls for the tip will look into it i need to get some for the merc to as i am in the process of restoring it.

you want to make sure to clean up the mettle and with a wire weal or something and get it as clean as possible. post some pic of what your talking about and of the inside. it wouldn't mess up the cock but if its in bad shape you might want to remove it then replace it after you put the gluevit down.

you want to make sure to clean up the mettle and with a wire weal or something and get it as clean as possible. post some pic of what your talking about and of the inside. it wouldn't mess up the cock but if its in bad shape you might want to remove it then replace it after you put the gluevit down.

you can find it on iboats.com here https://www.iboats.com/Boat-Parts-Accessories/dm/cart_id.447932903--keywords.gluvit--searched.1--session_id.937450372--submit.Search--submit%2Ex.0--submit%2Ey.0 stuff works really well but can be a pain to work with if you use it u must paint over the top as...

you can find it on iboats.com here https://www.iboats.com/Boat-Parts-Accessories/dm/cart_id.447932903--keywords.gluvit--searched.1--session_id.937450372--submit.Search--submit%2Ex.0--submit%2Ey.0 stuff works really well but can be a pain to work with if you use it u must paint over the top as...

here are some more pic of the almost finished product here is one over all from the front still need to paint the bottom and sides

i have had a blast this week building on my boat. i have managed to get all the carpet done and the inside pated with dark gray hammer finish turned out real nice. i also got most of my aluminum in with brass screws locks real sharp. i am real happy with the way it is turning out. i also...

first of nice score should be lot of fun. If the holes are small u can use some jb weld on them. the other thing you can do is weld them up. i used a TIG welder on mine but if i did not have access to a welder i would have used TB-weld. the other thing i would recommend is using gluevit (SP) on...

One thing I have not put much thought into was paint for the out side of the boat. I have seen a few people use stealflex and a few people that used oil based paint from rustolium. I was wondering about durability of boath and which one is better as fare as quality durability and any other...

One thing I have not put much thought into was paint for the out side of the boat. I have seen lot on stealflex and a few people that used oil based paint from rustolium. I was wondering about durability of boath and which one is better as fare as quality durability and price and any other...

i got a lot done this week its been nice having the week off from work. I got a couple days of fishing in too, with my buddy during the week on our pontoon boats up at lake Sonoma. wether was nice and the fishing wasn't to bad. will get some pic of the progress in the morning but here are a few...

well i did not get much done to day had class most of the day i did manage to get the two floor board cut out and coated with epoxy and then carpet. the first one was real easy and the second one was was a little harder but neither took as much time as the bow casting deck. in the end i was...

Slept in a little today and took the morning to plant my garden. Got started around 11 ish. I started working on the front casting deck. After taking out to a near by lake the other day to check for leaks i also checked stability to my surprise it was a lot more stable than my 12 footer. Which...

ok so first i thought i would post a quick picture of me 12 footer that i finished about a year ago. it came out good but it was a little to small for me and my girlfriend to go camping in so i started looking for a new project and found the 14 footer. I got a lot done this weekend =D> ...