JamesM56alum
Well-known member
- Joined
- Jan 25, 2012
- Messages
- 814
- Reaction score
- 0
Looks great
JamesM56alum said:Looks great
JamesM56alum said:Any updates ?
shmelty said:JamesM56alum said:Any updates ?
Soon.... I hope
Just buttoning up the wiring and waiting for carpet. Had to many weekend obligations to even look at her over the last few months.
shmelty said:For the curved deck up front i kind of lucked out. The old desk was completely rotten on the left side but the right side was in okay shape. I measured the original and cut it exactly in half then traced that half on a new piece of wood, flipped it over and traced the other side. When I cut out the deck I used a jigsaw and set the blade at an angle so the edges would fit the contour of the boat.
The hatches I got at Amazon.com https://www.amazon.com/Tempress-White-Hatch-without-23-25/dp/B00144CTWS/ref=sr_1_1?ie=UTF8&qid=1336565812&sr=8-1
The PVC Board I got at Home Depot.
As for sealing the wood... I really went overboard and did 2 coats of West Systems Epoxy
Enter your email address to join: