Hydrilla
Well-known member
Some of you may have seen my thread in the boat mods forum for my 1436 flat bottom jon that I picked up recently and am converting to a bass boat. In addition to setting up the boat, I'd also like to convert the trailer to the more traditional front to rear bunks versus how it is set up now.
I am including pics of how it was before I started taking everything off to prep for rust stripping and paint, as well as how it looks now. If you guys could help me figure out the best way to set this up, I'd appreciate it. I don't know where I should run the bunks from/to, where the boat should sit on them, if I should use my current front supports or do something different, and if I should do something with the vertical guides that have PVC rollers on them. Mine are in more of a V shape instead of the typical vertical configuration.
I appreciate any help/advice you can give.
I am including pics of how it was before I started taking everything off to prep for rust stripping and paint, as well as how it looks now. If you guys could help me figure out the best way to set this up, I'd appreciate it. I don't know where I should run the bunks from/to, where the boat should sit on them, if I should use my current front supports or do something different, and if I should do something with the vertical guides that have PVC rollers on them. Mine are in more of a V shape instead of the typical vertical configuration.
I appreciate any help/advice you can give.