bikerider
Well-known member
- Joined
- Apr 18, 2018
- Messages
- 230
- Reaction score
- 2
I'm working on making an oil catch can out of an old seafoam metal bottle. It will be sitting vertically as it would on the shelf at the auto parts store. I want to add an inline valve to the bottom so when the can fills with oil I can turn the valve and drain the oil. What is the proper procedure to drill a hole, install the valve and have it seal properly to keep oil from leaking? Also, I posted a picture of the valve I think I need but definitely welcome the advice of those more knowledgeable than I.