Weldorthemagnificent
Well-known member
- Joined
- Mar 12, 2017
- Messages
- 1,232
- Reaction score
- 59
I picked up this little motor for my 11’ boat I am working on. Seems like the perfect weight for the little boat. Anyway I bought it as a non runner and I’m pretty good with carbs so I started there. It was pretty clean already with a little grit in the low speed jet. Aha I thought. Motor started and for one brief shining moment of glory ran smoothly for 20 seconds and quit. Wouldn’t restart even spinning it with a drill. Noticed the engine was quite hot for such a short period of time (yes it was in a barrel). So an impeller is due for sure. What I’m not real experienced in is ignition. I’m pretty sure these coils aren’t quite in factory condition and will need replacing. Probably go ahead and get all new everything.
My question to those more experienced than I is. Is this as simple as removing and replacing, or is there some trickery I should know?
Sent from my iPhone using Tapatalk
My question to those more experienced than I is. Is this as simple as removing and replacing, or is there some trickery I should know?
Sent from my iPhone using Tapatalk