Has anyone replaced bearings and brushes on one of these?
TinBoats.net
The original aluminum boat site!
Minn Kota 55lb. Endura C2
- Thread starter gillhunter
- Start date
Help Support TinBoats.net:
huntinfool
Well-known member
Not on this model, but on others. If you have some knowledge on electrical and mechanical it is pretty straight forward.
Make sure to not force the bearings or the top and bottom after replacing. Also make sure to carefully pull the bushings and don't let the shaft catch the bushing either.
Make sure to not force the bearings or the top and bottom after replacing. Also make sure to carefully pull the bushings and don't let the shaft catch the bushing either.
