When I got this boat, the previous owner had never installed the windshield, but added a FF to the top of the console. I wanted the windshield installed, but after I mounted it, there wasn't enough room for the FF to mount.
There are 2 round indents in the dash, basically "catch-alls", and decided the one on the right would be the best spot. However, the base of the FF was larger than the opening, so I cut a round piece of 2"X6" to fit the hole, carpeted it, and mounted it with 1 screw right in the center through the bottom.....I tightened it enough to keep it in place, but can rotate it if needed.
I understand this won't fit everyones application, but might be adaptable to yours in the event you have a similar mounting problem.
ST
There are 2 round indents in the dash, basically "catch-alls", and decided the one on the right would be the best spot. However, the base of the FF was larger than the opening, so I cut a round piece of 2"X6" to fit the hole, carpeted it, and mounted it with 1 screw right in the center through the bottom.....I tightened it enough to keep it in place, but can rotate it if needed.
I understand this won't fit everyones application, but might be adaptable to yours in the event you have a similar mounting problem.
ST