NEED HELP 1973 Evinrude 25hp

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

headhunter954

Active member
Joined
Jun 9, 2011
Messages
39
Reaction score
0
Location
South,Florida
just got a jonboat it has A runing 1973 Evinrude 25hp elec start/pullstart it goes in foward & reverse with no problum . it starts right up with no problum BUT the idle is ruff. the guy I bought it from said it has not ran in a year and I think the gas is bad. but I dont relly know about this stuff . what do you guys think also if you guys know any known problums with these motor please let me know thanks
 
Try a gallon of fresh gas with 3/4 of a can of seafoam.
 
thanks guys yea just picked up some Seafoam that stuff is great .and do you guys know where I can find a impeller .also I sorry but what does points motor meen?
 
There's a set of points under the flywheel that need to be cleaned & set.You need a puller to pull flywheel off.
Get a repair manual for your motor. :roll: Best money you'll spend. =D>
 
Top