- Joined
- Apr 7, 2023
- Messages
- 156
- Reaction score
- 150
Really coming around swell. My gosh you did quite of job on the bottom inside transom track. Looks brand new !! I didn't get the boat w/ that alum. outside transom plate. Mine came w/ a wooden outside transom. I thought it might be original so I copied the pattern out of the Wenge. I guess mine is aftermarket and not original ?? Oh well, I like it. I was less stubborn w/the inside of the boat b'c it had a nice Tuff Coat and I thought I'd just freshen it up w/ a new coat over the old. I'm eventually geauxing to cover a lot up w/ a flat bottom frame and alum. floor along w/ maybe a couple few alum. storage and doors or lids. If I don't change the benches too much, I will prolly add Wenge bench tops. (got plenty).Like all the replies thanks. Well the transom hardware is ready for primerView attachment 117498 Took a lot longer than planned. The side brackets were full of corrosion. Really had to wire brush it to death to get it to shine. The long bracket across the bottom of the wood transom was difficult to wire brush. Tore my hand up pretty good with a wire brush but got it done. The inside of the flat plate had to be hand done. Still have some work on the inside were the gluvit ran View attachment 117499View attachment 117500View attachment 117502 Plan Tomorrow to smooth it out with orbit sander and 320 grit. Got the side ribs outside sanded and will coat it in black when done with the inside View attachment 117503 found a few mild runs and sanded them out on outside. Have plenty of blue paint left so no problem. Tired and a bit intoxicated but doing good.
I can't wait to see the paint steps coming soon !!
Good job sir,
God bless !!