New here

[ceejkay]

Let me introduce my self first. my name is Corey, i live in south Florida, and i found this site by looking for a front handle for my jon. Unfortunately it was after i did my jon/bass boat conversion. constructive criticism is encouraged. i am about 90% done. i need to do all the wiring. so fall all i got wired is the front light. but tell me know what you think. ohh and its a 12ft, sorry pics were too big, so here's links
https://i121.photobucket.com/albums/o221/CEEJKAY/DSCN2139.jpg
https://i121.photobucket.com/albums/o221/CEEJKAY/DSCN2140.jpg
https://i121.photobucket.com/albums/o221/CEEJKAY/DSCN2141.jpg
https://i121.photobucket.com/albums/o221/CEEJKAY/DSCN2142.jpg
https://i121.photobucket.com/albums/o221/CEEJKAY/DSCN2143.jpg

 

[Waterwings]

Nice work, and Welcome Aboard! 8)

Here's a neat step-by-step tutorial by member SMDave on how to post pics here at the site: https://www.tinboats.net/forum/viewtopic.php?f=1&t=3664

There is also a site Gallery where you can start your own gallery and place your pics:
https://www.tinboats.net/forum/images/index.php

 

[ceejkay]

thanks. i have a program to do that but im a little bit lazy when it comes to doing stuff like that

 

[phased]

Nice job Ceejkay. Wish I was that far along with mine.

 

[ceejkay]

thanks. it took some hours but well worth it.

 

[FishingBuds]

welcome aboard mate

 

[Jim]

Welcome aboard!

Thanks for joining!

You did a great job on your boat! How wide is it? Have you taken it out for a test run?

 

[Jim]

How far are you from Tampa? Any interest in an Electric only Tournament?

https://tinboats.net/forum/viewtopic.php?f=15&t=3779

 

[Captain Ahab]

Welcome aboard. =D>

 

[LeftCoastAngler]

Welcome to the zone! :USA1: You've come to the right spot for aluminum boating ideas... Looks like you went with a forward fuel tank eh?

Whereabouts in SFL? ~Let's go fishin'...
~LCA.

 

[ceejkay]

lets see im about 4-5 hrs from st pete, so tampa is a bit of a drive.i live in Ft. Lauderdale. no test runs yet. just sold my mammoth truck so i cant take it anywhere untill i get a hitch for the wife's car. fuel tank is going in the back due to weight balance. front is battery, anchor, life vests, and rope. tm only tourney would be hard because the engine on the back adds to the whole weight and stability issue.


on the project side. installed my tm plug receptical on the front and my aft light assembly. and half assed put my tm on the bow. i need to get one of those brackets from bps or make one. next will be redoing the trailer. as a trailer stand point its pretty bad, no bunks, no winch, no bow or mid section support, and its about 2ft short. if any one has a suggestions im open for ideas.
tight lines.............

 

[ceejkay]

oh and by the way, the carpet in between the decks is just an extra piece i had lying around. its not permanent by any means. havent decided what i want to do there yet. there will be a removable cooler/livewell. and the width is 32" at the base. but for 300 bucks for boat, motor, and trailer i cant complain.

 

[LeftCoastAngler]

but for 300 bucks for boat, motor, and trailer i cant complain.

nope. Darn sure can't.
SweetDeal.

~LCA.