Hey guys. This is my first time to post on here. I have been redoing an Alweld 1756v and it's down to wiring up lights and a bilge pump. I have a MARINE ELECTRIC 6 GANG LED TOGGLE SWITCH that I have connected to a Blue Sea glass fuse block. I have wired it up as I think is correct and according to the instructions on the box. When I wired everything up the bow navigation light comes on and stays on regardless of the switch position. I'm attaching a picture. Do any of you guys see where I'm going wrong?
TinBoats.net
The original aluminum boat site!
Newbie needs wiring help
- Thread starter Tneese
- Start date
Help Support TinBoats.net:
Hey guys. This is my first time to post on here. I have been redoing an Alweld 1756v and it's down to wiring up lights and a bilge pump. I have a MARINE ELECTRIC 6 GANG LED TOGGLE SWITCH that I have connected to a Blue Sea glass fuse block. I have wired it up as I think is correct and according to the instructions on the box. When I wired everything up the bow navigation light comes on and stays on regardless of the switch position. I'm attaching a picture. Do any of you guys see where I'm going wrong?
Bugpac
Well-known member
Your posative from bow light is not switched. Its getting direct power. The switch needs to go between the fuse block and the light.... in your case. Battery to fuse block to switch to light.
Bugpac
Well-known member
Your power to your switch should be were your posative to light is. There should be another connection on your switch panel for the light to connect.
