noisy boy

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

liplifter

New member
Joined
Jan 18, 2014
Messages
3
Reaction score
0
Location
indy
howdy,first time poster,long time reader.I have a 99 merc 65/45 2st.THE LOUDEST BOAT ON MY RIVER .any way to tune down the DB's on it?It's on a blazer 1752 that will run over dirt.love the boat but even cruising I can't hear other people in the boat.My brother lives 3 miles from the river and calls my wife everytime i'm out to ask if it's me.(no cell phone,never will)
 
Yes, unfortunately, that's one of the disadvantages of OB jets, the noise factor. And no easy way to reduce the DB's, short of re-routing the exhaust, which would prove extremely complex with an outboard.
 
Is the exhaust drilled or have an exhaust tuner?
If so you could reverse that aspect but if its all stock theres not much you can do.
 
The 60/40 mercs have always been noisy motors with a jet. Worse then about anyone I've listened to. Even worse with a different exhaust tuner. I think merc made 3 different stock tuners for that motor. They made 1 for the jet I can't remember about the other 2. It might have a hydro tec tuner or something like that. Is the breather box on it? Taking them off adds a lot of noise to a motor.
You have a blazer, are you in Missouri? Welcome to the site.
 
I got a buddy who lives on the miss by where i launch..

He says he can tell if its me with my 115/80 inline 6 merc or my other buddies johny 30/21..

They are loud and different but worth every decibel..
 
The four strokes are kindve odd, they are extremely quiet at idle and when at wot they make that deep note that can be heard from a long ways off but its not a loud piercing noise.
 
plate the jet, dynamat the breather box, drill out the water jet in the tuner, add plastic reeds, line the hood, add a raised rear deck.......
yep not much you can do lol.....

only one type of tuner in your engine. if it has been cut then its louder. you can check with a scope or pull the jet
drilling the exhaust plate will hurt power
 
[url=https://www.tinboats.net/forum/viewtopic.php?p=339186#p339186 said:
Seth » 20 Jan 2014, 15:18[/url]"]Another reason I love my Etec. I can still hear myself think while riding around. :mrgreen:

Love my loud @$$ inline merc because i cant here myself think.. half the runs i do i'd rather fly by wire than use the melon ;)
 
Canoeman said:
[url=https://www.tinboats.net/forum/viewtopic.php?p=339186#p339186 said:
Seth » 20 Jan 2014, 15:18[/url]"]Another reason I love my Etec. I can still hear myself think while riding around. :mrgreen:

Love my loud @$$ inline merc because i cant here myself think.. half the runs i do i'd rather fly by wire than use the melon ;)
Yup, sometimes hearing less brain gears turn and more real parts turn is better .
 
[url=https://www.tinboats.net/forum/viewtopic.php?p=339666#p339666 said:
smackdaddy53 » Today, 01:19[/url]"]
Canoeman said:
[url=https://www.tinboats.net/forum/viewtopic.php?p=339186#p339186 said:
Seth » 20 Jan 2014, 15:18[/url]"]Another reason I love my Etec. I can still hear myself think while riding around. :mrgreen:

Love my loud @$$ inline merc because i cant here myself think.. half the runs i do i'd rather fly by wire than use the melon ;)
Yup, sometimes hearing less brain gears turn and more real parts turn is better .

To each their own. 8)

Those loud engines are like trucks with loud exhaust. They sound cool when they go by, but I couldn't stand to listen to one all the time. I prefer my outboards and trucks on the quiet side. I'll leave the "cool" factor to others and go for functionality every time. :mrgreen:
 
wish mine was quitter but I'm in to going fast so it's the price I pay, at some point wind speed drowns out the motor. :mrgreen: lol
 
[url=https://www.tinboats.net/forum/viewtopic.php?p=339706#p339706 said:
smackdaddy53 » Today, 12:59[/url]"]I was kidding!
If my Merc 60 is loud enough to drown out my girlfriend I may leave it running all the time! Haha

That's a good point! :mrgreen:
 

Latest posts

Top