Midwesterner
Member
- Joined
- Jan 20, 2020
- Messages
- 23
- Reaction score
- 0
Recently found a deal on a new 20HP four stroke, so I'm resurrecting my old 14' sea nymph that's been in the shed for years.
Here's my dilemma, I was gifted two Humminbird depth finders and a power drive v2 trolling motor. The trolling motor is obviously 24 volts and the depth finders 12 volts.
I've mounted the motor on the bow and I'm considering placing two group 31's behind the front bench. I'm guessing this will be around 100 lbs.
I plan on moving the 12volt battery, size yet determined, behind the seat in front of the driver. Thoughts?
What's a good size for running two depth finders, lights, and a simple bilge pump.
I have a small deck in the blue area of the picture, outside of that, the boat is bare.
https://imgur.com/IpS5tYS
Here's my dilemma, I was gifted two Humminbird depth finders and a power drive v2 trolling motor. The trolling motor is obviously 24 volts and the depth finders 12 volts.
I've mounted the motor on the bow and I'm considering placing two group 31's behind the front bench. I'm guessing this will be around 100 lbs.
I plan on moving the 12volt battery, size yet determined, behind the seat in front of the driver. Thoughts?
What's a good size for running two depth finders, lights, and a simple bilge pump.
I have a small deck in the blue area of the picture, outside of that, the boat is bare.
https://imgur.com/IpS5tYS