Buster

I'm with DaleH. I've had very good luck with West Systems G/flex 650 epoxy. I've got a 1966 Lund C-14 that spent most of its life upside...

I've had good luck in some instances using spray adhesive or PSA backed sandpaper. Stick to hull and after cutting close to fit, sand...

That's it down at the dock

I'm the owner of my dad's '66 Lund C-14. Different construction and the supports are required. I agree with Airshot that they aren't...

The way the benches are installed the added supports are not necessary. Often they are added as rod holders with no real structural...

I turned the old Lead Acid battery into the backup battery for my sump pump. Perfect use.

Not sure, airshot. My main battery manufacturer (Amped Outdoors) lists recommended chargers. I also picked up a 50Ah TimeUSB battery...

Some chargers do, some don't. NOCO doesn't. Pro Mariner and MinnKota digital do. May be others, these I know about.

Yeah, fair to be concerned with your specific battery and BMS. Wire size was not suggested in any way. I believe the BMS "talk" to each...

It is the recommended method (from the mfg) if you don't have a charger that resets the BMS. In fact, mfg of my batteries recommended it...

That’s the plan. Break my LA charging routine that has been engrained in me for a lifetime. :).

Same. Had the advantage of being a very early adopter flying RC airplanes with LiPos and that got me in the habit of not keeping the...

Full charge can be an even bigger problem. It's always best to charge your Lithium batteries the night before heading out. When you get...

Here's that post Post in thread 'Lithium Battery Question - 50AH LiFeP04 for a 55# thrust Minn Kota?'...

In a different thread I posted Amp draw at motor speed setting for a 12V Minnkota with 100Ah LiFePo4 battery. Could help you decide how...