- Joined
- Aug 14, 2016
- Messages
- 6,746
- Reaction score
- 3,630
- Location
- Northern California
- LOCATION
- Northern California
What's the problem? Just hold it up with your left hand while drill the new hole and put the bolts in with your right hand. 
TinBoats.net
The original aluminum boat site!
Engine height
- Thread starter ChuckB
- Start date
Help Support TinBoats.net:
I'd have to park it under a tree, drop a line around the engine and adjust it accordingly. If the budget is tight or you're just determined to DIY.
- Joined
- Oct 29, 2023
- Messages
- 12
- Reaction score
- 7
- LOCATION
- Gilberts, IL
Ok, I think I will leave the motor at the same height and just had some aluminum strips as backing support to the lower bolts. I still have to remove the motor to replace the wood in the transom so right now I think I will get the electric hoist and mount it in my garage. A cherry picker would work but storing it is not desired. Now, do I buy an engine stand or build one.
lckstckn2smknbrls
Well-known member
- Joined
- Oct 5, 2008
- Messages
- 5,028
- Reaction score
- 384
- LOCATION
- Lake in the Hills Illinois
I have a 440/880 pound rated electric hoist mounted to some strut on the ceiling of my garage.
MrGiggles
Well-known member
A heavy duty ratchet strap, looped across a 2x4 laid crossways above the rafters, will easily lift that 30hp. Don't need anything fancy.
