Engine height

[LDUBS]

What's the problem? Just hold it up with your left hand while drill the new hole and put the bolts in with your right hand.

 

[Crazyboat]

That's what I do to even "fine tune" OBs to V6 and 500-pounds, but it ONLY works when the lower bolts - that are in slots on the bracket - have ample room up/down to move the top bolts up or down 1 hole or so.

The OP wants to mount his engine higher and he's out of room on the slots on his lower bolts as is.

I'd have to park it under a tree, drop a line around the engine and adjust it accordingly. If the budget is tight or you're just determined to DIY.