Search results

The 40 HP motor isn't that much heavier and the added HP will make a Big difference. Make sure when mounting the Foil on the motor is at or just above the boat bottom. I moved my motor up 1 1/2" to accomplish this and gained 4MPH. Good Fishing!

Here in the Midwest we have Menards, Beats all the others by a mile. Home Depot is always Last on the list.

You can look it up online by Serial Number.

The only area's needing an etching primer are bare metal. Prep is everything to a Good Paint job. Good Luck!

+1 for Critical Defense. Shoot the ammo you carry to make sure everything functions properly.

Ammo will be too costly..............

That's the longest Craigslist add I've ever seen.......................... :USA1:

I used RustOLeum spray cans. It leaves a slightly ruff surface that is Not Slippery when wet. I spent a lot of prep time and thoroughly washed the boat out before application. It had 2 small places where it came off (Dime Size), a clean off an respray and it's like new. This has heald up for 3...

Is the name of the Boat "Death Wish"?

Indiana doesn't recognize Record Fish from Private waters. Kind of like High Fence Hunting. Cool for the young guy that caught it!

I wouldn't put SeaFoam in the cylinders, It'll wash the lubrication off the Piston Rings. SeaFoam is a fuel system additive and a Good One, I use it in everything. The 50/1 oils will lubricate that old motor just fine and not foul any spark plugs in the process. Is the shaft length correct for...

Every backyard Deck is made from treated wood with Galvanized screws or nails holding it together. You should be good to go. I've never had any problems with Galvanized fasteners on Aluminum boats.

Have it blasted with Walnut Shells. Not too abrasive but will remove the paint without damage to the Hull. I use this media for polishing Brass for reloading.

An Oldie, but a Goodie! Buck the rivets, throw on a motor and GO! I remember some Lone Star F/G Runabouts when I was a kid (long time ago) They had big fins like a Cadillac.

Check youtube for a video of the replacement. It's not hard to do if you have some hands on experience.

Sounds good for now. Replace the water pump impeller before putting it back in service.

You can use Plywood, it works well for stability in a case like this.

Here's your Info Arrow Glass Boat Company Eldo Craft Boat Co Po Box 126 Smackover 71762 Gmi/lp Mem Outboards, Open Motorboats, Jon Boats Eldo Craft Oob 070786 / Reissued Code To Arrow Glass Purchased By 'sea' No Longer Associated 7/86 (alum) Purchased By Glasstream 10/86 - See 'gsy' 'tvl'...

I always use stainless fasteners, never any problems. Freshwater use only.

Rod Holders at Bass Pro.