1992 LOWE 17’ project

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fbmikey1

Member
Joined
Sep 3, 2019
Messages
13
Reaction score
6
I acquired this 1992 Lowe 17’ boat with 1991 motor and trailer, in a trade in October 2019. We ran and fished it on the ICW and mouth of the Brazos River in TEXAS until December, as-is,with minimal problems. In early 2020 I disassembled the floor and moved the consul out-of-the-way to see what I was actually dealing with. Found all ribs cracked around the center of the bottom area, where a previous attempts have been made to shore up these areas by welding in some aluminum.After inspection the decision was made to finish boxing in previous areas that had been worked on. I also decided to add additional support to the structure by installing some 1/4” and 3/6” stringers.Added additional support to transom by tying it into the new material 1” angle.
1675618468417.jpeg
1675618515964.jpeg
1675618549237.jpeg
1675618603539.jpeg
1675618628130.jpeg
1675618680337.jpeg
1675618724667.jpeg
 

Attachments

  • 1675618753934.jpeg
    1675618753934.jpeg
    141.7 KB
  • 1675618791201.jpeg
    1675618791201.jpeg
    134.2 KB
  • 1675618829362.jpeg
    1675618829362.jpeg
    150 KB

Latest posts

Top