24v system and 12v accessories

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

justin sumner

Active member
Joined
Feb 9, 2014
Messages
28
Reaction score
0
Location
OFALLON IL
I bought a 24v trolling motor and want to run my 12v accessories on my 24v system
I dont want a 3rd battery and do not need one
I just cannot decide if I want to buy a 24v to 12v step down transformer and run my 12v from there, or just wire up my 12v as shown in the attachment

I am not running much as far as 12v accessories, just 2 navigation lights, a bilge, and sonar
Is it really that necessary to drop my voltage from the 24v system, or will I be just fine wiring as attached off one of the batteries
 

Attachments

  • SnipImage (3).jpg
    SnipImage (3).jpg
    27.5 KB
The wiring in your diagram will work fine, but It is never a good idea to run a sonar on the same batteries as your trolling motor. The motor may generate interference on the sonar.
 

Latest posts

Top